To order please click on the appropriate BUY button below.

Store More metal Garden Building feature dependable (inside running) SLIDING DOORS plus a strong ENTRY / EXIT ramp across the entire door.

• No Rust
• Rot and rodent proof material
• Totally maintenance free
• No cracks - No warps
• Superb Value

• 10 Year No Rust Perforation
• Galvanized
• Easy to install
• Practical & Functional
• Lasting good looks

All StoreMore sheds are flat packed and carry a 10 year minimum 'NO RUST PERFORATION' They are manufactured from 0.24mm galvanized rolled form steel. All framing (unpainted parts) are hot dip galvanized whilst the panels are electro galvanized. The Drumdale range only is hot dipped galvanized and pre-painted steel throughout. Translucent roof panels allow light in through the roof, and replace an existing panel. They are available as an optional extra and may be fitted to one or both sides of the roof. One is supplied as standard with the DRUMDALE range. Nominal shed measurements are ROOF measurements including roof overhang.

SHED ONLY

SHED ONLY prices do NOT include a floor. This will need to be slabs, concrete or wood. These are not supplied.

FOUNDATION KIT

FOUNDATION KIT price(s) includes metal battens (illustrated) that are assembled to construct a frame. The foundation kit is flat packed and will need to be assembled. Concrete is used (not supplied) to flood between the metal battens to make the floor. Alternatively you can timber (not supplied) over the metal battens.

Click here to view the Foundation Kit

TIMBER FLOOR KIT

TIMBER FLOOR price(s) include a wooden floor (illustrated) consisting of pre-cut boards and battens. The timber floor is flat packed and will need to be assembled.

Click here to view the Timber Floor Kit

TRANSLUCENT ROOF PANEL

TRANSLUCENT ROOF PANEL price(s) are for each additional panel required. Non are fitted as standard, except in the Drumdale range, which has one as standard. Non can be fitted to the smallest ASHDALE EL63 model, or any of the FERNDALE range. See illustration at end of this page.

Click here to view the Translucent Roof Panel close up

STORM KIT

STORM KIT price(s) are for the exact number of 3.25" wide vertical, steel wall supports to allow for each wall panel joint to be overlapped internally from base rail to eaves. Recommended for exposed or windy locations. Not required on the ESKDALE range

Click here to view the Storm Kit close up

HILTI SCREWS & DRILL BIT

The Hilti Hammerscrew (for concrete or flagstone bases). A ready to use, quick set impact fastener with high expansion. Fits through pre-drilled holes in the shed's base rail. Masonry bit (15/64") supplied with the Hammerscrews. Simply fix by hammering on the drive screw. Can be removed with a cross recess screwdriver.

Ashdale Range (6ft wide with standard gable)

SPECIFICATIONS / PRICES

Ashdale 6ft x 3ft

Ashdale Floor Plans

The sliding double doors at the front of the shed are in the 6' section. They open to 28.5" and are 62" high (59" on EL63). The apex height is a generous 72" on all the Ashdale range, except the EL63 which is 69". The wall height is 65" on the range, except the EL63 which is 62". Available in 3ft, 5ft, 6ft and 7ft depths. An outstanding value for money steel shed.

Click here to view Biohort metal sheds

Click here to view Trimetals metal sheds

Bedale Range (8ft wide with standard gable)

SPECIFICATIONS / PRICES

Bedale 8ft x 7ft

The sliding double doors at the front of the shed are in the 8' section. They open to 40.5" and are 62" high. The apex height is a generous 74" on all the Bedale range. The wall height is 65" on all units in the range. Available in 5ft, 6ft, 7ft and 9ft depths. Big storage problems are solved easily and economically with the Bedale range.

Sizes available

Click here to view Biohort metal sheds

Click here to view Trimetals metal sheds

Coledale Range (10ft wide with standard gable)

SPECIFICATIONS / PRICES

Coledale 10ft x 8ft

The sliding double doors at the front of the shed are in the 10' section. They open to 55.5" and are 62" high. The apex height is a generous 75" on all the Coledale range. The wall height is 65" on all units in the range. Available in 7ft, 8ft, 9ft and 13ft depths. Impressive statistics for a shed priced so economically!

Sizes available

Click here
to view Biohort metal sheds

Click here
to view Trimetals metal sheds

Click here
to view StoreMore metal garages

Drumdale Range (10ft wide with extra high and vented gables)

SPECIFICATIONS / PRICES

Drumdale 10ft x 11ft High Gable with one Translucent Roof Panel as standard. (Extra panels available)

The sliding double doors at the front of the shed are in the 10' section. They open to 55.5" and are 62" high.The apex height is a very generous 85" on all the Drumdale range, with the 2 largest models having vents. The wall height is 65" on all Drumdales. Available in 7ft, 9ft, 11ft and 13ft depths. Hot dipped galvanized throughout, and with one translucent roof panel as standard, these are impresive specifications by anyone's standards.

Sizes available

Click here
to view Biohort metal sheds

Click here
to view Trimetals metal sheds

Click here
to view StoreMore metal garages

Eskdale Range (8ft & 10ft wide ship lap clad with extra high gables)

SPECIFICATIONS / PRICES

Eskdale 8ft x 6ft

Eskdale 10ft x 12ft

Sizes available

The sliding double doors at the front of the shed are in the 8' section for EVS86, and in the 10' section for EVS108 and EVS1012. They open to 40.5" on EVS86, and 55.5" on EVS108 and EVS1012. For all three models in the range the double doors are 68" high. The apex height is a very generous 86" on the EVS86 and 92" on EVS108 and EVS1012. The wall height is 71" on all three Eskdales. EVS86 is 8' wide and 6' deep, EVS108 is 10' wide and 8' deep and EVS1012 is 10' wide and 12' deep.

As the individual panels are all sculptured to mimic the front profile of shiplap cladding, they have far more inherent strength than can be achieved with a simple flat profile. They are also very pleasing on the eye.

Click here
to view Biohort metal sheds

Click here
to view Trimetals metal sheds

Click here
to view StoreMore metal garages

Ferndale Range (6ft & 8ft wide pent roof style)

SPECIFICATIONS / PRICES

Ferndale 6' x 4'

Ferndale 8' x 4'

Ferndale LOW 8' x 4'

Sizes available

Pent sheds are always wider than they are deep, and have their double sliding doors in the longest dimension. The best selling Ferndale 6' x 4' is available in olive green or brown, as is the 8' x 4' version. The 8' x 4' LOW Ferndale is only available in brown. No translucent roof panels are available, as none can be fitted.

• The EP64 is 68" high at the apex with the 59" high sliding doors opening to 28.5"
• The EP84 is 68" high at the apex with the 59" high sliding doors opening to 40.5"
• The EP104 is 68" high at the apex with roof sloping down to 62" at the rear.
• The EP84 LOW is 54" high at the apex with the 45" high sliding doors opening to 40"
• Show me a photo of the Ferndale EP64 Brown

Click here to view BioHort Storage Boxes

Click here to view Trimetals Garden & Bicycle Stores

Trentdale Range (6ft, 8ft & 10ft wide ship lap clad wood effect metal shed)

SPECIFICATIONS / PRICES

Trentdale 10ft x 8ft

Trentdale 10ft x 8ft (door open)

Sizes available

The sliding double doors at the front of the shed are in the 6ft section for ED65, in the 8ft section for ED86 and are in the 10ft section for ED106, ED108 and ED1012. They open to 28.5" on ED65, 40.75" on ED86 and 56" on ED106, ED108 and ED1012.

For all five models in the range the double doors are 68.25" high. The apex height is a generous 79.25" on the ED65 and ED86 rising to 82.25" on ED106, ED108 and ED1012. The wall height is 71" on all five Trentdale models. ED65 is 6ft wide and 5ft deep, ED86 is 8ft wide and 6ft deep, ED106 is 10ft wide and 6ft deep, ED108 is 10ft wide and 6ft deepand ED1012 is 10ft wide and 12ft deep. All sizes are external and include the roof overhang. They are not base or inside measurements.

Show me the Steel Floor Support

Biohort Metal Sheds

Trimetals Metal Sheds

Yardmaster Metal Sheds

Accessories

SPECIFICATIONS / PRICES

Shelf Unit

Tool Hanging Rack

DOOR HANDLES

Our black door handles do not have sharp edges and doors can be padlocked, if necessary twice.

Lock not supplied.

IMPORTANT FEATURES

Triple roof beams

Translucent roof panel

Storm Kit

Independently tested, triple roof beams are standard to all 8' and 10' fronted buildings. They give our buildings remarkable strength, even for heavy snow loads.

Our twin, inside running sliding doors glide open and closed on our exclusive pendulum glide system. No roller system can match it for reliability and ease of operation. Specially designed inside tracks. They won't jump or jam in any season.

One translucent roof panel is standard with each DRUMDALE shed. Can be positioned on either side of the roof. Additional panels available at extra cost.

Translucent roof panels CANNOT be fitted to the smallest ASHDALE model (6' x 3') or any of the FERNDALE or TRENTDALE range. They are available options on all the other featured sheds.

The Storm Kit comprises the exact number of 3.25" wide vertical, steel wall supports to allow for each wall panel joint to be overlapped internally from base rail to eaves. Recommended for use on sheds which are to be sited in exposed or windy locations. Not required on the Eskdale or Trentdale range.

EASY ASSEMBLY

The base frame, corner panels, side panels and rear top rails of any STORE MORE buildings are quickly assembled. Note: midwall bracing right round inside of building adding extra permanent strength.

Gable installation, main ridge beam assembly and the attractive white roof panels follow. Ridge cover, roof edge trim, door assembly and installation complete your STORE MORE building.