This traditional style lean-to greenhouse has a roof vent, louvre, and alloy shelf as standard and an eaves height of 5'11", excluding base. We build this model in lengths from 6' 4" to 12'6". It is a very comprehensive range of lean-to structures.

As Standard:

• Finger tip sliding door
• Strong integral gutters giving a lot of strength at the eaves
• 1 (minimum) roof vent, 4 sq ft (0.372m2)
• All clips are stainless steel, not galvanised, to prevent rust
• Maintenance free, rigid aluminium frame, which will not rust, warp or rot
• Combination of economy, value and quality
• Comprehensive instruction manual
• 1 louvre window - 5 bladed
• Shelf to suit each width

Buying Options:

Glass Options:

We offer three types of glazing:

• Horticultural - Standard 3mm float glass as traditionally used in greenhouses.
• Toughened - Toughened to British Standard Class 6206 Grade A for maximum light and extra safety. All toughened glass models in this range utilise full sheet glass in the roof and side walls. This makes for a much cleaner line with no build up of moss or algae where the sheets of glass would normally overlap. Full sheet toughened glass is more expensive to produce than 2 or 3 smaller sheets, but we firmly believe it is the better option.
• Polycarbonate - 6mm Twinwall Polycarbonate glazing. click here for more detailed information.

IMPORTANT NOTE:
If your lean-to covers the entrance to a dwelling, your lean-to must have toughened glass throughout.

Powder Coated Colour Options:

Available in silver milled aluminium finish and an additional 5 powder coated colour finishes, as illustrated below:

We offer all the colour options but only show the more popular green, as well as milled silver aluminium. White, terracotta black and brown are available at the same cost as green. If you want to but your unit in white, terracotta, black or brown please order in GREEN and make a note in the Comments Box at the foot of the first page of the Shopping Cart: REQUIRED IN WHITE / TERRACOTTA / BLACK or BROWN. We will confirm your colour choice in writing for you to check!

The 6ft 3ins wide Kensington with single sheet toughened glass
and with additional roof vents mounted on a 5" alloy base.

Elite Kensington 6' 5" wide lean-to greenhouse

SPECIFICATIONS / PRICES

The Kensington range allows you to bring the garden to the house while not compromising the benefits of a greenhouse.

Integral guttering gives additional
strength at the eaves

Corner detail showing
solid aluminium sections

It is recommended that a brick base or the 5" alloy pre-formed base is used for this model. For brick base dimensions click here.

6' wide Kensington with optional double doors in white powder coated finish

To order your Elite lean-to greenhouse please BUY the required frame AND the required glass separately

Additional Buying Options:

ALLOY BASES FOR KENSINGTON 6ft 3ins LEAN-TO

ALLOY BASES in either silver aluminium or powder coated colours are available if you do not wish to build your own brick base. Please select from the table below. Bases cannot be ordered separately, but only in conjunction with a frame and glass from the above table.

ADDITIONAL DOORS FOR KENSINGTON 6ft 3ins LEAN-TO

ADDITIONAL DOORS in either silver aluminium or powder coated colours are available. One door is supplied as standard, which can be positioned in either end. An additional door would allow a door to be located at both ends OR a door in one end and a door along the length. Two additional doors would allow various combinations including double doors in the length (only possible on models over 8ft in length). Please select from the table below. Additional doors cannot be ordered separately, but only in conjunction with a frame and glass from the above table.

To help us to help you please e-mail us from the contact button at the foot of the page If you order additional doors. Please state, looking from outside the unit, where you want to place the doors. Thank you.

• Available in longer lengths than shown, in additional 2ft (610mm) increments. Models over 20ft long must include a partition.

Please contact us for a quote.

Roof Vents:

• Each roof vent is a full 24" x 24" (610mm x 610mm) and 2 are included as standard on the 14ft & 16ft models, 3 on the 18ft and 20ft length models.